Industrial ETO Sterilizer
ETO/EO is a broad-spectrum sterilizing agent because of its effective bactericidal, sporicidal, and virucidal activity. ETO sterilizer is widely used for a wide variety of products, such as medical supplies & devices, hygiene products, Medicines, cosmetics, textiles & biological products, valuables, and spices & herbs, etc.
The compatibility of ETO with a wide range of materials and its chemical molecule penetration properties in less aggressive environments make ETO sterilization the most appropriate process for most heat or moisture sensitive materials. ETO sterilization is described as the most cost-effective, low-temperature sterilization process available nowadays, with a recognized history of reliability.
Features of Our ETO Sterilizer
- The entire sterilization process automatically controlled by the computer.
- Two-level control: Industrial control computer + SIEMENS PLC
- Manual control switchable in the system.
- Sliding doors and vertical rising doors open and close automatically.
- Swing doors lock and unlock automatically, but open and close manually.
- Door seals inflate and deflate automatically.
- Automatic real-time alarming and safety protection.
Options of Door Configurations
Pneumatic Horizontal Sliding Door
- Ideal and commonly used for EO sterilizer all over the world.
- Open and close automatically controlled.
- Safe, reliable, smooth, and quiet operation.
- The most economical among the 3 door types.
Vertical Rising Door
- Open and close automatically controlled.
- Suitable for conditions of space limited on the left & right.
- With higher room ceiling height required than the other 2 door types.
- Safe, reliable, smooth, and quiet operation.
Pneumatic Swing Door
- Doors open & close semi-automatic controlled:
- lock & unlock automatically, but with operator required to open and close.
- Suitable for conditions of space limited on the left & right.
- Safe, reliable, smooth, and quiet operation.
Primary Technical Parameters & Specifications
Material of Chamber Body: Quality stainless steel
Sterilizing Temperature: 0~100℃, PID adjustable
Sterilizing Pressure: -85 ~ +80 Kpa
Sterilizing Humidity: 30 ~ 100%RH
EO Concentration: 300 ~ 1000mg/L
Sterilizing Time: 3~12hrs
Pre-Vacuum: -85Kpa
Times of Flushing: Arbitrarily
Ventilation Time: Arbitrarily
Max Electrical Heating Power: 9 ~ 80KW
Max Steam Heating Power: 3 ~ 30KW
Power: 3-phase, 5-wire, 380V50Hz
| Model/Size | Outer Dimensions L x W x H (Meters) | Transport Dimensions L x W x H (Meters) | Inner Dimensions L x W x H (Meters) |
|---|---|---|---|
|
HSX-1 / 1M3 |
L1.55 x W1.8 x H1.8 |
L1.55 x W1.8 x H1.8 |
L1.26 x W0.8 x H1.05 |
|
HSX-3 / 3M3 |
L2.3 x W2.3 x H2.3 |
L2.3 x W1.9 x H2.3 |
L1.85 x W1 x H1.65 |
|
HSX-6 / 6M3 |
L3.25 x W2.95 x H2.3 |
L3.25 x W1.9 x H2.3 |
L2.8 x W1.35 x H1.7 |
|
HSX-10 / 10M3 |
L4.95 x W2.95 x H2.3 |
L4.95 x W1.9 x H2.3 |
L4.5 x W1.35 x H1.7 |
|
HSX-15 / 15M3 |
L7.2 x W2.95 x H2.3 |
L7.2 x W1.9 x H2.3 |
L6.75 x W1.35 x H1.7 |
|
HSX-20 / 20M3 |
L9.45 x W2.95 x H2.3 |
L9.45 x W1.9 x H2.3 |
L9 x W1.35 x H1.7 |
|
HSX-25 / 25M3 |
L10.45 x W3.05 x H2.3 |
L10.45 x W2 x H2.3 |
L10 x W1.45 x H1.7 |
|
HSX-30 / 30M3 |
L11 x W2.95 x H2.6 |
L11 x W1.95 x H2.6 |
L10.5 x W1.35 x H2.1 |
|
HSX-35 / 35M3 |
L13 x W2.95 x H2.6 |
L13 x W1.95 x H2.6 |
L12.5 x W1.35 x H2.1 |
|
HSX-50 / 50M3 |
L9.5 x W3.1 x H2.7 |
L9.5 x W3.1 x H2.7 |
L9 x W2.6 x H2.2 |
|
HSX100 / 100M3 |
L16 x W3.1 x H3 |
L16 x W3.1 x H3 |
L15.5 x W2.6 x H2.5 |
|
Remark: Customization upon requirements is acceptable. |
|||
To learn more about how our sterilizer can improve your manufacturing process.
